Duo Two-Factor Authentication for Amazon WorkSpaces

Prerequisites

To protect Amazon WorkSpaces logins with Duo you must be using an AD Connector type directory. The AWS Simple AD directory type does not support multifactor authentication.

View your directory in the WorkSpaces Management Console to obtain the Directory IP addresses. You will need them to configure the Duo Authentication Proxy.

You'll also need to enroll your WorkSpaces users in Duo before they can use multifactor authentication.

First Steps

To integrate Duo with Amazon WorkSpaces, you will need to install a Duo RADIUS authentication proxy service on one or more EC2 instances in an AWS VPC, or on one or more machines in an on-premises environment. Before proceeding, you should locate (or set up) a system on which you will install the Duo Authentication Proxy. The proxy supports Windows and Linux systems (in particular, we recommend Windows Server 2016 or later, Red Hat Enterprise Linux 6, CentOS 6, Debian 6, or Amazon Linux 2015.03 or later).

It is highly recommended that you assign a fixed private IP to your Authentication Proxy machine, as the WorkSpaces MFA configuration contacts the RADIUS server by IP address.

Then you'll need to:

1. Sign up for a Duo account.
2. Log in to the Duo Admin Panel and navigate to Applications.
3. Click Protect an Application and locate the entry for RADIUS in the applications list. Click Protect to the far-right to configure the application and get your integration key, secret key, and API hostname. You'll need this information to complete your setup. See Protecting Applications for more information about protecting applications in Duo and additional application options.

Install the Duo Authentication Proxy

If you will reuse an existing Duo Authentication Proxy server for this new application, you can skip the install steps and go to Configure the Proxy.

The Duo Authentication Proxy can be installed on a physical or virtual host. We recommend a system with at least 1 CPU, 200 MB disk space, and 4 GB RAM (although 1 GB RAM is usually sufficient). See additional Authentication Proxy performance recommendations in the Duo Authentication Proxy Reference.

We do not recommend installing the Duo Authentication Proxy on the same Windows server that acts as your Active Directory domain controller or one with the Network Policy Server (NPS) role. If you must co-locate the Duo Authentication Proxy with these services, be prepared to resolve potential LDAP or RADIUS port conflicts between the Duo service and your pre-existing services.

duoauthproxy-version.exe /S

duoauthproxy-version.exe /S /exclude-auth-proxy-manager

sudo ./duoauthproxy-build/install --install-dir /opt/duoauthproxy --service-user duo_authproxy_svc --log-group duo_authproxy_grp --create-init-script yes

Configure the Proxy

After the installation completes, you will need to configure the proxy.

The Duo Authentication Proxy configuration file is named authproxy.cfg, and is located in the conf subdirectory of the proxy installation. With default installation paths, the proxy configuration file will be located at:

Note that as of v4.0.0, the default file access on Windows for the conf directory is restricted to the built-in Administrators group during installation.

The configuration file is formatted as a simple INI file. Section headings appear as:

[section]

Individual properties beneath a section appear as:

name=value

The Authentication Proxy may include an existing authproxy.cfg with some example content. For the purposes of these instructions, however, you should delete the existing content and start with a blank text file.

Duo Authentication Proxy Manager

The Duo Authentication Proxy Manager is a Windows utility for managing the Authentication Proxy installation on the Windows server where you install the Authentication Proxy. The Proxy Manager comes with Duo Authentication Proxy for Windows version 5.6.0 and later.

The Proxy Manager cannot manage remote Duo Authentication Proxy servers, nor can you install the Proxy Manager as a stand-alone application. There is no Proxy Manager available for Linux. The Proxy Manager only functions as part of a local Duo Authentication Proxy installation on Windows servers.

Learn more about using the Proxy Manager in the Duo Authentication Proxy Reference before you continue.

To launch the Proxy Manager utility:

• Open the Start Menu and go to Duo Security.
• Click the Duo Authentication Proxy Manager icon to launch the application. You must have administrative privileges on the Windows server and accept the prompt for elevation.
• The Proxy Manager launches and automatically opens the %ProgramFiles%\Duo Security Authentication Proxy\conf\authproxy.cfg file for editing.

Use the Proxy Manager editor on the left to make the authproxy.cfg changes in these instructions. As you type into the editor, the Proxy Manager will automatically suggest configuration options. Accepting these suggestions helps make sure you use the correct option syntax.

As you follow the instructions on this page to edit the Authentication Proxy configuration, you can click Validate to verify your changes (output shown on the right).

When you complete the Authentication Proxy configuration steps in this document, you can use the Save button to write your updates to authproxy.cfg, and then use the authproxy.cfg button to start the Authentication Proxy service before continuing on to the next configuration steps.

If you do not use the Proxy Manager to edit your configuration then we recommend using WordPad or another text editor instead of Notepad when editing the config file on Windows.

Configure the Proxy for Duo Only Authentication

At the top of your authproxy.cfg, create a [duo_only_client] section. This section has no additional parameters to configure.

[duo_only_client]

When using the [duo_only_client] configuration, the Authentication Proxy will ignore primary credentials and perform Duo factor authentication only.

Configure the Proxy for Your AWS Directory

Next, you need to set up the Authentication Proxy to work with your AWS WorkSpaces Directory. To do so, create a radius_server_duo_only section with the following properties:

Required

Optional

A completed config file for AWS WorkSpaces using radius_server_duo_only with no primary authenticator should look something like:

[duo_only_client]
 
[radius_server_duo_only]
ikey=DIXXXXXXXXXXXXXXXXXX
skey=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
api_host=api-XXXXXXXX.duosecurity.com
failmode=safe
radius_ip_1=10.20.10.10
radius_secret_1=theradiussecret
radius_ip_2=10.20.11.10
radius_secret_2=theradiussecret
port=1812

Make sure to save your configuration file when done.

Start the Proxy

net start DuoAuthProxy

authproxyctl start

net stop DuoAuthProxy & net start DuoAuthProxy

authproxyctl restart

# /opt/duoauthproxy/bin/authproxyctl start

# /opt/duoauthproxy/bin/authproxyctl status

# /opt/duoauthproxy/bin/authproxyctl restart

If you modify your authproxy.cfg configuration after initial setup, you'll need to stop and restart the Duo Authentication Proxy service or process for your change to take effect.

You can view information about your Authentication Proxy in the Authentication Proxy Dashboard.

Configure Amazon WorkSpaces MFA to use Duo

Add the Duo RADIUS server

Ensure that your WorkSpaces directory controllers are able to access your Authentication Proxy server on UDP port 1812 (or whichever port used in the Authentication Proxy configuration). You may need to add an custom incoming UDP/1812 rule for the proxy instance and an outgoing UDP/1812 rule for the directory controller to your VPC Security Groups to allow access. You can either use the security groups from the directory controllers as the source (as shown here), or use the IP addresses defined for the directory in the WorkSpaces console.

1. Log in to the AWS Console and navigate to WorkSpaces > Directories.

2. Select the directory where you want to enable multifactor authentication and click Actions > Update Details

3. On the "Update Directory Details page expand Multi-Factor Authentication.

4. Check the Enable Multi-Factor Authentication option and enter the following information:

   Property	Value
   RADIUS server IP address(es)	Enter the IP address(es) of each Duo Authentication Proxy server (comma-separated).
   Port	Enter 1812 (or whichever port configured on your Duo Authentication Proxy).
   Shared secret code	Enter the RADIUS secret shared with your Duo Authentication Proxy.
   Protocol	Choose PAP.
   Server timeout (in seconds)	Increase the timeout to 20 seconds.
   Max retries	Leave at the default setting.

   

5. Click Update and Exit to save the RADIUS server profile. The RADIUS status for the directory will change to Completed.

High Availability Scenario

You can deploy two or more Duo Authentication Proxy servers for use with WorkSpaces MFA to provide a highly-available MFA solution. For example, you can install the Duo proxy service on two instances in different Availability Zones (AZ) and then configure WorkSpaces MFA RADIUS settings to use both of those proxy machines. That way if the first server does not respond WorkSpaces MFA will send the authentication request to the next listed RADIUS IP address.

Repeat the Authentication Proxy installation steps on a second Linux or Windows machine instance. The proxy configuration should be identical to the first one (including the RADIUS secret). Start the Duo Authentication Proxy on the second machine.

In the WorkSpaces Directory MFA configuration, enter the RADIUS server information as shown in the previous section but enter the IP addresses of all your Authentication Proxy machines as a comma-separated list in the "RADIUS server IP address(es)" field.

Test Your Setup

Launch the WorkSpaces client and enter your primary authentication credentials.

You'll be prompted for additional credentials.

Enter a passcode generated by the Duo Mobile app or a hardware token, or type in the name of an out-of-band factor. You may choose from the following factor names:

You can also specify a number after the factor name if you have more than one device enrolled. So you can enter phone2 or push2 if you have two phones enrolled.

Troubleshooting

Need some help? Review troubleshooting tips for the Authentication Proxy and try the connectivity tool included with Duo Authentication Proxy 2.9.0 and later to discover and troubleshoot general connectivity issues.

Also take a look at our Amazon WorkSpaces Knowledge Base articles or Community discussions. For further assistance, contact Support.

Network Diagram

1. Client connection initiated to Amazon WorkSpaces
2. Primary authentication using AWS directory
3. AWS directory sends secondary authentication request to Duo Security’s Authentication Proxy
4. Duo Authentication Proxy connection established to Duo Security over TCP port 443
5. Secondary authentication via Duo Security’s service
6. Duo Authentication Proxy receives authentication response
7. Duo Authentication Proxy sends access granted response to AWS directory
8. AWS directory authentication completed
9. Amazon WorkSpaces access granted

Known Issues

• The WorkSpaces client requires input of the secondary factor. Automatic push authentication is not possible at this time.